Rebreather UBS

Code: U50001

From the exhalation counterlung, the gas is conveyed into the scrubber unit, which has the function of absorbing and chemically fixing the CO2 contained in the exhaled gas. It is made of a metal drum inserted in a metal hollow cylinder, which contains the soda lime necessary to absorb the carbon dioxide produced during the breathing process; the canister type is a radial flow design: Built in solid and durable stainless 316 steel in order to add ballast and balance to the unit and to keep the temperature of the breathing gas at its best rate of use and absorption by the CO2 absorbent. An innovative design that permits small quantities of water in the loop to be trapped and prevents the diver from inhaling caustic cocktails, if occurred. The exhaled gas passes through an inner water -trapping chamber and is forced to flow through the anti - channeling perforated pipe in the middle of the canister. Gas flows through the cross section and radiates outwards through the absorbent. In this way the gas flow can not create preferred ways. In the same time the breathing effort is very low. The inner part is closed by a plug with 4 springs to hold pressed the soda lime. The perfect closure is assured by a large O-Ring. The connectors between canister and breathing bags are soldered on the side.

Code: U90001

Scrubber canister neoprene cover.
For the immersions in cold waters in order to facilitate the reaction of the soda lime.

Studied with a practical cover in order to load the soda lime.

Code: U90051

A calcium hydroxide - based sodalime suitable for UBS and Azimuth radial filters. 6-12 mesh grade (1,0 - 2,5mm). 16,8 kg. can package